Workflow
From floor plan to proposal in one project
The design flow in the tool, step by step: import and scale a plan, place devices, check the numbers, build zones, rack and wiring, then issue the paperwork.
5 min read
Blog topic, 03
Amplifiers and wiring, channels, loads, lines and heat.
The design only works if the amplifiers can drive it and the installer can follow it. These articles cover loads, lines, channels, heat and cable.
3 articles in this topic
Numbered by their place in the whole series.
Acoustics
Subwoofers that count where people are
Where to put subwoofers so the bass is even where people sit or stand: room modes, corner and wall positions, the level against the mains, and the checks.
4 min read
Amplifiers and wiring
Low impedance or a 70/100 V line?
When to wire speakers at low impedance and when to use a 70 V or 100 V line, with parallel loads, minimum impedance, taps, cable runs, and power and heat.
4 min read
Ready when the client is.
Draw it, check it, show it, price it and hand it over, from one project.
15-day trial for approved companies. No card, nothing to cancel.